Application
Cladding, Fencing, InteriorFinish
Deep Charred RawProfile
Square edge
Shiplap UYS
Shiplap UYV
Battens
Width
95mm, 118mm, 144mmThickness
21mmLength
3000mm, 4200mmAbout Accoya Deep Charred Raw
Without visible knots, Accoya offers an elegant and aesthetic finish that will subtly enhance your cladding – whether treated or left raw for a more minimalist look.
- Allow wood to acclimatize on-site for at least 5–7 days before installation.
- Orientation: horizontal, vertical, or diagonal, depending on design and/or profile.
- Use kiln-dried structural timber battens (C24) or an aluminium cladding system, spaced max. 400–600 mm, depending on board size.
Ensure continuous rear ventilation with a minimum 20 mm air gap behind the cladding. - Install a UV-resistant façade membrane suitable for open-joint and ventilated rainscreen systems.
- Use flashing to protect open cavities and exposed areas where required.
- Use self-drilling stainless steel facade screws (grade A2 or A4); pre-drill where necessary to avoid splitting.
- Hidden clip systems may be used depending on the profile.
- Seal all saw cuts with a compatible touch-up or finishing oil to maintain performance and appearance.
Re-oiling every 4–5 years is recommended if colour retention is desired.
- Country of origin: New Zealand (Radiata Pine)
- Fire Resistance (EN 13501-1):
- Untreated: D-s1, d0
- Treated: B-s2, d0
- Use Class (EN 335):
Class 1–4 – suitable for use outdoors above ground, in-ground, and freshwater contact
Related Wood Species
Projects using our wood
